SPAD Extra, July 18th, 2006
Photos By Kris Frost

One #4 screw goes into the edge of the HDPE firewall and the other #4 screw goes into the HDPE landing gear re-enforcement block. The edge around the front screw is bigger because my first one cracked there. Also note one #10 and one #8 screw holding on the landing gear - A landing "mishap" pulled the #6 screws out one time...

Previous    Next    Up to Index    800x600

One #4 screw goes into the edge of the HDPE firewall and the other #4 screw goes into the HDPE landing gear re-enforcement block. The edge around the front screw is bigger because my first one cracked there. Also note one #10 and one #8 screw holding on the landing gear - A landing

Previous    Next    Up to Index    800x600


[Home] [About] [Photos] [Links] [Misc Info]